Automatic transmission: Before starting, you need to look around the vehicle to ensure safety, open the door and put the gear in the parking gear before starting. After stepping on the brake, press the button to start the vehicle. The vehicle will idle for 30 seconds and check whether all the indicator lights are normal. If all indicators are normal, put them in D gear to get ready to start.
The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake, turn the ignition key to the ignition gear, and start the engine. Step on the foot brake, release the handbrake, and pull the gear from N to D.
After the key is turned to the ON position, turn on the vehicle for a few seconds to complete the self-check. Then step on the brake and turn the key to start the vehicle (automatic transmission). After starting, the gear is put into D gear, slowly release the brake, and the vehicle moves forward.
How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
How to start the car is as follows: Automatic gear car: Automatic gear car needs to look around the vehicle, open the door after confirming safety, make sure that the gear is in front of the stop gear, step on the brake, and then press the button to start the button, the vehicle idles for about 30 seconds, check whether the indicator light on the dashboard is abnormal, and check that there is no difference. Always hang D gear and get ready to drive.
Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts.Step on the car clutch pedal. Put the car on the first gear. Step on the accelerator pedal of the car while half lifting the clutch pedal of the car. When the vehicle is shaking, release the handbrake of the car to complete the start.
1. Start smoothly and posture correctly. When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena. Only a smooth start can save fuel.
2. Adjust the seat after getting on the car. If our legs can't bend and stretch freely, it will be very tiring to control the throttle and clutch for a long time.
3. The starting method of the car is to step on the foot brake and pull the gear to N gear; turn the key, turn half a turn, and ignite the engine; wait for the engine to turn for about 1 minute, listen to the sound of the engine turning less, step on the foot brake, pull the gear to D gear, release the handbrake; master the steering wheel, slowly release the foot brake, and the car will automatically Start.
4. Dahan Automobile Circle 2023-10-26 · Contributed more than 329 answers Follow Expand All The correct order of starting the automatic transmission car The correct order of starting the automatic transmission car is as follows: Insert the car key into the keyhole and rotate it for half a lap. After the self-test is completed, the power start. Step on the brake and hang the D gear. Release the handbrake.
5. The upper and lower standards are the horizon at 1/3 of the upper part of the mirror, and the rearview mirror is subject to seeing the entire rear window.
6. Get ready to get on the car. Before getting on the car, you should patrol around the car, check the condition around the vehicle, and pay attention to whether there are obstacles under the car and around the car body. You can only get on the car after confirming that it is safe, because there are many blind spots in the car. If you observe through the rearview mirror, the field of view is very limited.
Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
After starting, the gear is put in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on it.After closing the device, start the engine, and then hang it into 1st gear. While slowly releasing the clutch, move your right foot from the brake pedal to the accelerator pedal, and refuel slightly. The throttle and clutch are used together, and the vehicle moves forward slowly.
Steps to start the car correctly: adjust the seat to your position after getting on, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.
1. Before getting in the car, check the surroundings of the vehicle to make sure that there are no small animals or children next to you, or whether there are iron nails, glass and other items that hinder the safety of the car. The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.
2. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
3. How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
OKX Wallet to exchange-APP, download it now, new users will receive a novice gift pack.
Automatic transmission: Before starting, you need to look around the vehicle to ensure safety, open the door and put the gear in the parking gear before starting. After stepping on the brake, press the button to start the vehicle. The vehicle will idle for 30 seconds and check whether all the indicator lights are normal. If all indicators are normal, put them in D gear to get ready to start.
The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake, turn the ignition key to the ignition gear, and start the engine. Step on the foot brake, release the handbrake, and pull the gear from N to D.
After the key is turned to the ON position, turn on the vehicle for a few seconds to complete the self-check. Then step on the brake and turn the key to start the vehicle (automatic transmission). After starting, the gear is put into D gear, slowly release the brake, and the vehicle moves forward.
How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
How to start the car is as follows: Automatic gear car: Automatic gear car needs to look around the vehicle, open the door after confirming safety, make sure that the gear is in front of the stop gear, step on the brake, and then press the button to start the button, the vehicle idles for about 30 seconds, check whether the indicator light on the dashboard is abnormal, and check that there is no difference. Always hang D gear and get ready to drive.
Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts.Step on the car clutch pedal. Put the car on the first gear. Step on the accelerator pedal of the car while half lifting the clutch pedal of the car. When the vehicle is shaking, release the handbrake of the car to complete the start.
1. Start smoothly and posture correctly. When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena. Only a smooth start can save fuel.
2. Adjust the seat after getting on the car. If our legs can't bend and stretch freely, it will be very tiring to control the throttle and clutch for a long time.
3. The starting method of the car is to step on the foot brake and pull the gear to N gear; turn the key, turn half a turn, and ignite the engine; wait for the engine to turn for about 1 minute, listen to the sound of the engine turning less, step on the foot brake, pull the gear to D gear, release the handbrake; master the steering wheel, slowly release the foot brake, and the car will automatically Start.
4. Dahan Automobile Circle 2023-10-26 · Contributed more than 329 answers Follow Expand All The correct order of starting the automatic transmission car The correct order of starting the automatic transmission car is as follows: Insert the car key into the keyhole and rotate it for half a lap. After the self-test is completed, the power start. Step on the brake and hang the D gear. Release the handbrake.
5. The upper and lower standards are the horizon at 1/3 of the upper part of the mirror, and the rearview mirror is subject to seeing the entire rear window.
6. Get ready to get on the car. Before getting on the car, you should patrol around the car, check the condition around the vehicle, and pay attention to whether there are obstacles under the car and around the car body. You can only get on the car after confirming that it is safe, because there are many blind spots in the car. If you observe through the rearview mirror, the field of view is very limited.
Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
After starting, the gear is put in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on it.After closing the device, start the engine, and then hang it into 1st gear. While slowly releasing the clutch, move your right foot from the brake pedal to the accelerator pedal, and refuel slightly. The throttle and clutch are used together, and the vehicle moves forward slowly.
Steps to start the car correctly: adjust the seat to your position after getting on, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.
1. Before getting in the car, check the surroundings of the vehicle to make sure that there are no small animals or children next to you, or whether there are iron nails, glass and other items that hinder the safety of the car. The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.
2. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
3. How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
OKX Wallet apk download latest version
author: 2025-01-10 17:50
Binance app download Play Store
235.21MB
Check
Okx app download
155.34MB
Check
Binance APK
676.74MB
Check
Okx app download
938.21MB
Check
OKX Wallet download
656.63MB
Check
Binance market
966.42MB
Check
Binance exchange
554.32MB
Check
Binance Download for PC
151.22MB
Check
Binance login
233.19MB
Check
Binance APK
347.12MB
Check
Binance wikipedia
592.75MB
Check
Binance app
189.44MB
Check
OKX Wallet login
822.55MB
Check
Binance login
643.24MB
Check
Binance download iOS
688.39MB
Check
OKX Wallet login
952.19MB
Check
Binance download
916.28MB
Check
Okx app download
966.26MB
Check
Binance login
578.36MB
Check
Binance login
855.14MB
Check
Binance download APK
587.57MB
Check
Binance app download Play Store
855.18MB
Check
Binance download Android
774.27MB
Check
Binance wikipedia
198.51MB
Check
Binance exchange
497.83MB
Check
OKX Wallet to exchange
223.61MB
Check
Binance wallet
561.61MB
Check
OKX review
164.99MB
Check
Binance login App
241.31MB
Check
okx.com login
749.82MB
Check
OKX app
542.61MB
Check
Binance app
949.59MB
Check
Binance login
597.84MB
Check
OKX Wallet download
822.38MB
Check
Okx app download
791.92MB
Check
Binance login
584.99MB
Check
Scan to install
OKX Wallet to exchange to discover more
Netizen comments More
2354 豕突狼奔网
2025-01-10 18:10 recommend
2495 松茂竹苞网
2025-01-10 17:41 recommend
2885 优游涵泳网
2025-01-10 16:32 recommend
1484 溜须拍马网
2025-01-10 16:29 recommend
613 自寻烦恼网
2025-01-10 16:21 recommend