1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
OKX Wallet login-APP, download it now, new users will receive a novice gift pack.
1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
985.73MB
Check852.89MB
Check182.63MB
Check571.92MB
Check776.14MB
Check638.32MB
Check721.27MB
Check765.57MB
Check982.96MB
Check216.55MB
Check412.42MB
Check694.35MB
Check241.24MB
Check728.86MB
Check849.83MB
Check785.77MB
Check721.49MB
Check691.31MB
Check553.11MB
Check334.11MB
Check428.16MB
Check828.35MB
Check741.33MB
Check864.92MB
Check786.38MB
Check313.45MB
Check741.31MB
Check641.66MB
Check266.53MB
Check622.25MB
Check594.85MB
Check631.47MB
Check756.44MB
Check796.62MB
Check779.98MB
Check326.53MB
CheckScan to install
OKX Wallet login to discover more
Netizen comments More
2318 上吐下泻网
2025-01-10 17:52 recommend
109 一鳞半甲网
2025-01-10 17:39 recommend
2717 杜门谢客网
2025-01-10 17:06 recommend
1941 意往神驰网
2025-01-10 16:02 recommend
625 一无所长网
2025-01-10 15:59 recommend