OKX app

List of the contents of this article:

• 1, When the computer starts up, it suddenly appears "What is the solution to select R to start repair on the first screen?
• 2, boot prompt file damage what's wrong
• 3, How to do r repair when the computer appears
• 4、... Unable to start system32CONFIGsystem, and it says to press R to repair. What to do
• 5, What is the reason for the file damage displayed when the computer starts up and press r to repair?

What's wrong with the boot prompt file damage and press R to repair

Check the hardware connection Sometimes, this prompt may be caused by hardware connection problems. Check the connection of all external devices, such as keyboard, mouse, monitor, etc.Make sure that they are all properly connected and not loose.

The computer has a damaged or lost file. When the computer is turned on, there is an error prompt of file damage or loss, mainly because the configuration file in the 32 directory of the system is damaged or lost, causing Windows to fail to start.

First of all, let's follow the computer prompt r key to see if it can go to the interface. If it can, it means that the system file is not seriously damaged. If not, it means that the Chinese damage is relatively serious, and it can't be repaired by pressing the r key.

How to fix r on the computer

1. On the first screen, press the R key on the keyboard to enter the repair mode. In repair mode, you will be asked to answer some questions for repair.Please follow the prompts on the screen step by step. According to the specific content of the problem, the repair process will automatically detect and repair the problem of file damage.

2. The way to solve this problem is to press the R key to repair it according to the prompts. The following are the specific steps: press the power button to start the computer when it is turned on. When the error prompt of "File Damage or Lost" appears, press the R key on the keyboard.

3. When the computer has a problem of R repair, you first need to find out the cause of the problem. It may be system file damage, hardware failure or software conflict, etc. Before repairing, be sure to back up important data to avoid loss. Data can be copied to an external hard disk, stored in the cloud or used by other reliable backup methods to ensure data security.

4. Step 1: Enter the advanced boot option. In the Windows system, we can enter the repair mode through the advanced boot option. First of all, we need to turn off the computer, and then press the power button to start the computer. When the Windows boot screen appears, press the power button to force shut down the computer.

5. Press "F8" to turn on, enter, enter, enter "safe mode", find: "last correct setting", press, try. 2. Or, find the "Normal Startup" mode in "Safe Mode", press it, and try it. 3. If it still doesn't work next time you turn it on, I suggest you do: "one-click restore".

6. Press F8 when you turn on until the advanced option appears, and select "The latest correct configuration" to return to repair.Press F8 to enter the safe mode and exit. Select restart or shutdown to enter the normal mode (repair the registry).

... Unable to start system32CONFIGsystem, and it says to press R to repair.What to do

1. Enter the system recovery environment, enter the administrator password in the command prompt window (if there is a setting password), and then press the Enter key.

2. Complex method 1/ Put the installation CD of Windows XP into the optical drive and restart the computer. 2/ In the "Welcome to the Installer" interface, press the R key to enter the recovery console.

3. The repair method is as follows: put the prepared XP system CD into the optical drive. 2. Restart the computer, press delete to enter the bios, and set the CD as the first boot item in the boot. After automatic restart, enter the CD to start booting and wait for booting.

4. As an interface, press R to enter the console. Enter the number of the operating system to enter the corresponding console.At this time, the system will prompt you to enter the password, which is the administrator account password.

5. Method 1 You can find a computer that can start normally and then download the missing or damaged problems offline. You can also start up and use the PE system to enter the corresponding directory of the hard disk and copy the corresponding file to the USB flash drive. Then overwrite this file in the same way.

What is the reason for the file damage displayed when the computer starts up and press r to repair?

1. The reason is very complicated. It is estimated that it is caused by abnormal shutdown. Repair it first. If it doesn't work, you need to reinstall the system. Press the F8 key to enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.

2. The computer has a file damage or loss. When the computer is turned on, the error prompt of file damage or loss is mainly due to the damage or loss of the configuration file in the 32 directory of the system, which makes Windows unable to start.

3. What is the reason for this? There are many reasons for this phenomenon, such as broken hard disk, constant forced restart, frequent power outage, accidental deletion of some system programs, etc. If the hardware is broken, you can only buy a new one. If the software is broken, we have many ways.

4. It is caused by the sudden power-off of your computer or the card before shutting down, resulting in disk damage. Try to turn it on and off repeatedly and leave it for a period of time. If it really doesn't work, reinstall the system. If you can't reinstall it yourself, go to the repair shop to find a repairman to help you.

5. This problem is mostly caused by the quality of the memory stick. Please check and replace the memory test 2 first. The hard disk is bad. Please fix it.