okx.com login

How to enter PE in Win7 (how to start the PE system in Win7) PE (Pre-installation Environment) system is okx.com loginan independent operating system environment, often It is used for computer maintenance and repair. Unlike the Windows operating system, PE is not installed on the hard disk, but runs on the boot disk. This article will introduce the steps on how to enter the PE system in Win7. I. To make a PE boot disk to enter the PE system, you need to make a boot disk first.The tools and materials required to make PE boot disks include USB flash drives or CDs, PE system files and production tools. 1. PE system files PE system files need to be downloaded from official channels. Microsoft provides some free PE system files, including Windows PE and Windows RE (Recovery Environment). Windows PE is a customized and minimized Windows operating system environment, which can be repaired in case the computer cannot enter the operating system; Windows RE is a pre-installed environment, which includes some recovery tools that cannot be started in Windows. Restore and repair the system in the case of movement. Two. The commonly used PE production tools include Windows As officially provided by Microsoft.Session and Deployment Kit (ADK) and third-party tools such as Magic Universal Boot Disk. This article takes the magic universal boot disk as an example. 3. Production steps a. Download and install the Magic Universal Boot Disk. B. Download and unzip the PE system file. C. Open the magic universal boot disk and select the type of boot disk you want to make (USB flash drive or CD). D. Select the folder where the PE system file is located and click "Startup Disk Production". E. After the production is completed, you can pull out the USB flash drive or insert the CD to proceed to the next step. II. Enter the PE system. When we need to enter the PE system, we need to do the following operations: 1. Turn on the power. Two. Enter the BIOS settings. 3. Set the startup order. Four. Insert the made boot disk and restart the computer.5. Enter the PE system. The detailed operation steps are as follows: 1. Turn on the power. Press the power button to turn on the power. Two. Enter the BIOS settings. BIOS settings are the basic settings of the computer system, which can configure the hardware and software environment of the computer. Usually, we can press certain keys, such as F2, F12, etc., to enter the BIOS settings when starting up. 3. Set the startup order. In the BIOS settings, find the startup order option. Under normal circumstances, the default order of power-up is hard disk, optical drive and USB flash drive. We need to set the boot order to USB flash drive, optical drive and hard disk. Then press F10 to save and exit. Four. Insert the made boot disk and restart the computer. Insert the made PE boot disk into the USB flash drive or optical drive of the computer, and then restart it. After booting, the computer will use the system files in the boot disk to boot.5. Enter the PE system. When the prompt "Please press any key to start the CD..." appears, press any key to enter the PE system. In the PE system, we can carry out system repair, virus cleaning, backup data and other operations. In summary, entering the PE system is a basic computer maintenance skill. It can provide us with a problem-solving environment when the system cannot be started, which is very important for computer maintenance. This article introduces the steps to make a PE boot disk and enter the PE system, hoping to be helpful to readers.

Contact Us
Phone：020-83484628