Binance US

List of contents in this article:

• 1,Binance US How to operate a car start
• 2, Steps to start a car?
• 3, The correct starting order of the automatic transmission
• 4, How to start a car accurately
• 5, Car start steps

How to operate car start

1. Smooth start, correct posture.When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena. Only a smooth start can save fuel.

2. Car start operation steps: first open the door, sit in the driver's position, adjust the seat, and fasten the seat belt. Turn on the turn signal to remind the vehicles and passers-by behind.

3. Start completed. Attention should be paid to when starting an automatic car: Make sure that the seat belt is fastened when starting. You need to maintain the correct posture when starting. You should choose the right gear when starting. When starting, you should master the oil separation and cooperation. Gear description: p - parking, parking gear, start gear.

The starting steps of the car?

Check around the vehicle before getting on the car to make sure that there are no small animals or children next to you, or whether there are iron nails, glass and other items that hinder the safety of the car. The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.

Clutch fully stepped on: After starting the car, the left foot completely stepped on the clutch, which is prepared before the semi-clutch state. Hang the gear to the first gear: push it with the palm of your right hand and hang the gear of the shift lever into the first gear as the starting gear.

Car start operation steps: first open the door, sit in the driving position, adjust the seat, and fasten the seat belt. Turn on the turn signal to remind the vehicles and passers-by behind.

The correct order of starting the automatic transmission car

1. The starting order of the automatic transmission car is: ignition, fasten on the seat belt, step on the brake, hang the D gear, release the handbrake, turn left turn signal, release the brake, step on the accelerator, return to the right turn signal, and start to complete. Automatic transmission cars move the gear to the correct position after the engine is started, such as changing to D gear when moving forward and R gear when reversing.

2. The correct starting order of the automatic transmission is: ignition, fasten the seat belt, step on the brake, hang the D gear, release the handbrake, turn on the left turn signal, observe whether there are pedestrians in front and after, press the horn, and play a reminder role; slowly release the brake, step on the accelerator, return to the right turn signal, and start is completed.

3. The starting order of automatic transmission is as follows: ignition. Atten your seat belt. Step on the brake and hang the D gear.Release the handbrake. Turn on the left turn signal, check back and forth to see if there are pedestrians, and press the horn to act as a reminder. Slowly release the brake, step on the accelerator, return to the right turn signal, and start.

4. The starting order of automatic transmission vehicles is: ignition, brake, gear, brake, and accelerator.

5. The automatic transmission vehicle is divided into the following four steps: First, turn the car key to the second grid, so that the computer system on the car starts to self-check for at least 5 seconds.

6. The correct way to start the automatic transmission car The correct way to start the automatic transmission car is as follows: turn the ignition key to the power supply gear. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake to start the engine. Hot car in place. Step on the foot brake, pull the gear from N gear to D gear, and release the handbrake.

How to start an accurate car

1. Start smoothly and correct posture. When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena.Only a smooth start can save fuel.

2. Step on the brake, put the N gear to ignite, then put the D gear from the N gear, release the brake, lift the foot brake to start, automatic transmission. As the name implies, the driver does not need to shift gears manually, and the vehicle will automatically select the appropriate gear according to the driving speed and traffic conditions.

3. The upper and lower standards are that the horizon is 1/3 of the upper part of the mirror, and the rearview mirror is subject to seeing the entire rear window.

Car start steps

1. First, turn on the left turn signal, observe the road conditions, and ensure safety. Step on the brake, step on the clutch, start the car, hang the gear, release the brake, release the foot brake, slide the car, slowly lift the clutch, accelerate and upshift, and do it in one go. Start from the flat ground. First, turn on the left turn signal to observe the road conditions and ensure safety.

2. Car start operation steps: first open the door, sit in the driver's position, adjust the seat, and fasten the seat belt. Turn on the turn signal to remind the vehicles and passers-by behind.

3. Hang up to 1st gear, and then relax the parking brake lever, that is, the handbrake. At the same time, observe the situation around the car and whether it has all the conditions to start.

4. Completely step on the clutch: After starting the car, the left foot completely steps on the clutch, which is for the semi-clutch state. Hang the gear to the first gear: push it with the palm of your right hand and hang the gear of the shift lever into the first gear as the starting gear.

5. Start and complete. Attention should be paid to when starting an automatic car: Make sure that the seat belt is fastened when starting. You need to maintain the correct posture when starting. You should choose the right gear when starting.When starting, you should master the oil separation and cooperation. Gear description: p - parking, parking gear, start gear.

6. Steps to start the car correctly: adjust the seat to your position after getting on, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.