1. Shut down the power and turn off the power to open the box, plug in and unplug the hard disk power cable and data cable again, then turn it on, press the DEL key (the notebook is F2 or other) to enter CMOS, see if the hard disk can be detected. IF THE AVAILABLE SYSTEM USB DISK CAN BE DETECTED, USE DISKGEN TO DETECT IT AFTER IT STARTS AND REBUILD THE MBR. If not, replace the connection or hard disk and reinstall the system.
2. Turn off the floppy drive. Restart the computer, press Del to enter the BIOS, find STANDARD CMOS SETUP, press Enter in the open interface, change Drive A and DriveB to turn off, set the floppy drive to do not start, press ESC key, F10 key, Y key, enter to save and return Out of the settings.The floppy drive is not detected when it is turned on.
3. Method 1: Start through group policy settings-Run-gpedit.msc-"Local Computer" Policy-Computer Configuration-Security Settings-Local Policy-Security Options-Double-Click the right window "Interactive Login: No need to press ctrl+alt+del"-Already Enable - Just confirm.
4. You can expand the local policy/security options in the control panel/management tools/local security policy, and double-click interactive login on the right: no need to press CTRL+ALT+DEL, set it to enabled, click Apply and confirm.
5. Solution: Open the computer and find a round, shiny button battery like a 1-yuan coin on the motherboard, and there is a card next to it. GentlyThe battery was removed as soon as it was removed. According to the model, I spent 2 yuan on the Internet to buy four, and the rest was used as the car key remote control battery.
6. When the computer is turned on, you need to press del to enter the system. Solution I. When the computer is turned on, you are prompted to press del. You can't enter directly because the slave slot on the system motherboard is not plugged into the hard disk. First of all, confirm that the slave slot on the motherboard is not plugged into the hard disk. Then go to the bios to turn off this mouth, it should be fine.
1. After making a USB disk boot disk on the available computer, will DownloadThe system iso file is directly copied to the GHO directory of the USB flash drive, and the iso image does not need to be decompressed.
2. Call up the shortcut boot menu, press the arrow key and the return key to select your USB flash drive name to enter the PE selection interface, and do the system again. After reinstalling, the operating system is basically in the initial state, and the various functions are the best and the operation is the smoothest, which plays a certain role in resetting the use of the device.
3. If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.
4. Press the del key to enter the bios settings, SELECT AND ENTER THE SECOND ITEM, "BIOS SETUP" (OR SELECT ADVARED BIOS FEATURES DIFFERENT MOTHERBOARD OPTIONS MAY BE DIFFERENT).
5. At present, the easiest way to reinstall is to use the 360 system to reinstall the master USB disk version. Download the 360 emergency disk on the 360 official website, plug in the USB flash drive, and follow the prompts or the next step to make a reinstall USB disk.
Start the computer and hold down the DEL key until the BIOS setting window appears (usually with a blue background and yellow English). Select and enter the second item, "BIOSSETUP".
After making a USB boot disk on the available computer, copy the downloaded system iso file directly to the GHO directory of the USB disk, and the iso image does not need to be decompressed.
Use the keyboard, keep pressing the "right" arrow, move to the top exit, and then press enter.
OKX Wallet to exchange-APP, download it now, new users will receive a novice gift pack.
1. Shut down the power and turn off the power to open the box, plug in and unplug the hard disk power cable and data cable again, then turn it on, press the DEL key (the notebook is F2 or other) to enter CMOS, see if the hard disk can be detected. IF THE AVAILABLE SYSTEM USB DISK CAN BE DETECTED, USE DISKGEN TO DETECT IT AFTER IT STARTS AND REBUILD THE MBR. If not, replace the connection or hard disk and reinstall the system.
2. Turn off the floppy drive. Restart the computer, press Del to enter the BIOS, find STANDARD CMOS SETUP, press Enter in the open interface, change Drive A and DriveB to turn off, set the floppy drive to do not start, press ESC key, F10 key, Y key, enter to save and return Out of the settings.The floppy drive is not detected when it is turned on.
3. Method 1: Start through group policy settings-Run-gpedit.msc-"Local Computer" Policy-Computer Configuration-Security Settings-Local Policy-Security Options-Double-Click the right window "Interactive Login: No need to press ctrl+alt+del"-Already Enable - Just confirm.
4. You can expand the local policy/security options in the control panel/management tools/local security policy, and double-click interactive login on the right: no need to press CTRL+ALT+DEL, set it to enabled, click Apply and confirm.
5. Solution: Open the computer and find a round, shiny button battery like a 1-yuan coin on the motherboard, and there is a card next to it. GentlyThe battery was removed as soon as it was removed. According to the model, I spent 2 yuan on the Internet to buy four, and the rest was used as the car key remote control battery.
6. When the computer is turned on, you need to press del to enter the system. Solution I. When the computer is turned on, you are prompted to press del. You can't enter directly because the slave slot on the system motherboard is not plugged into the hard disk. First of all, confirm that the slave slot on the motherboard is not plugged into the hard disk. Then go to the bios to turn off this mouth, it should be fine.
1. After making a USB disk boot disk on the available computer, will DownloadThe system iso file is directly copied to the GHO directory of the USB flash drive, and the iso image does not need to be decompressed.
2. Call up the shortcut boot menu, press the arrow key and the return key to select your USB flash drive name to enter the PE selection interface, and do the system again. After reinstalling, the operating system is basically in the initial state, and the various functions are the best and the operation is the smoothest, which plays a certain role in resetting the use of the device.
3. If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.
4. Press the del key to enter the bios settings, SELECT AND ENTER THE SECOND ITEM, "BIOS SETUP" (OR SELECT ADVARED BIOS FEATURES DIFFERENT MOTHERBOARD OPTIONS MAY BE DIFFERENT).
5. At present, the easiest way to reinstall is to use the 360 system to reinstall the master USB disk version. Download the 360 emergency disk on the 360 official website, plug in the USB flash drive, and follow the prompts or the next step to make a reinstall USB disk.
Start the computer and hold down the DEL key until the BIOS setting window appears (usually with a blue background and yellow English). Select and enter the second item, "BIOSSETUP".
After making a USB boot disk on the available computer, copy the downloaded system iso file directly to the GHO directory of the USB disk, and the iso image does not need to be decompressed.
Use the keyboard, keep pressing the "right" arrow, move to the top exit, and then press enter.
872.28MB
Check999.55MB
Check425.56MB
Check342.68MB
Check934.13MB
Check763.17MB
Check115.86MB
Check152.79MB
Check479.82MB
Check313.58MB
Check889.98MB
Check772.63MB
Check743.56MB
Check499.64MB
Check427.45MB
Check541.73MB
Check794.42MB
Check119.16MB
Check488.85MB
Check757.47MB
Check453.32MB
Check125.74MB
Check511.28MB
Check544.17MB
Check682.95MB
Check934.62MB
Check533.52MB
Check376.44MB
Check478.36MB
Check296.43MB
Check223.63MB
Check265.86MB
Check797.61MB
Check795.64MB
Check922.18MB
Check619.64MB
CheckScan to install
OKX Wallet to exchange to discover more
Netizen comments More
1935 杏雨梨云网
2025-02-28 09:45 recommend
2716 洪水横流网
2025-02-28 09:39 recommend
1383 传经送宝网
2025-02-28 08:13 recommend
442 不次之位网
2025-02-28 07:37 recommend
2041 赈贫贷乏网
2025-02-28 07:05 recommend